A Arms and Mount Plates for 1 1/2" diameter tubing
Kit includes: front A-arms, chassis mounting plates, and mounting plate for steering rack.
**Heims are not included in the initial pricing. Please select the heims option if you would like those included with your kit.** With this option you will receive 8 - 1/2" heims and 4 - 5/8" heims.
This kit combined with other kits we offer can be used to replace your VW front beam suspension and turn it into a dual A-arm long travel or in a complete new chassis build.
One of the most important & critical areas of off road buggies is the front suspension & steering.
We have designed & developed a front A-arm kit, that will make one of the hardest areas to build on a buggy now one of the easiest.
The A-arms are built in a jig for consistent performance & quality.
- 1”
dia x .095” thick DOM tubing
- ¼” & 3/16” thick laser cut plates
- Threaded
tube ends
- CNC
machined mild steel A-arm ends
Approximate mounting width: 10"
Approximate lower control arm length: 17.5"
Approximate upper control arm length: 16"
19”
of travel with less than .080” bump steer thru the suspension travel
70”
wide track width at outside of tires
Designed
for FOX 2.0 air shocks 10” travel
Designed
for Latest rage end load steering rack
The
chassis mount plates are ¼” thick steel and are made so that the forward
tubes lock them into place turning them into their own jig for perfect
placement.
These
also set the right position for the A-arm heims locations.
There
is also a steering rack mount plate that interlocks with the chassis mount
plates, to set the perfect position for the rack, and almost eliminating bump
steer.
These
plates can be ordered for 1 ¼” tubing or 1 ½” chassis tubing sizes.
Please
check out some of our other kits to go with this one to complete your
build.
Full
front kits are available to make your custom build easier, and give you premium
performance from the start.
[ITEMPRICE]